call_end

    • chevron_right

      Planet found orbiting backward between two stars

      news.movim.eu / ArsTechnica • 22 May • 1 minute

    While our Sun prefers to go solo, many other stars are parts of binary systems, with a pair of stars gravitationally bound to each other. In some cases, the stars are far enough apart that planets can form around each of them. But there are also plenty of tight binary systems, where the stars orbit each other at a radius that would place them both comfortably inside our Solar System. In these systems, exoplanets tend to be found at greater distances, in orbits that have them circling both stars .

    On Wednesday, scientists described a system that seems to be neither of the above. It is a tight binary system, with a heavy central star that's orbited by a white dwarf at a distance two to three times larger than Earth's orbit. The lone planet confirmed to be in the system is squeezed in between the two, orbiting at a distance similar to Earth's distance from the Sun. And, as an added bonus, the planet is orbiting backward relative to the white dwarf.

    Orbiting ν Octantis

    The exosolar system is termed ν Octantis (or Nu Octantis), and its primary star is just a bit heavier than our Sun (1.6 solar masses). It's orbited by a far dimmer companion that's roughly half of our Sun's mass, but which hasn't been characterized in detail until now. The companion's orbit relative to the central star is a bit lopsided, ranging from about two astronomical units (AU, the typical Earth-Sun distance) at its closest approach to roughly three AU at its farthest. And, until yesterday, the exact nature of the companion star was not clear.

    Read full article

    Comments

    • chevron_right

      AT&T has $6 billion deal to buy CenturyLink fiber broadband business

      news.movim.eu / ArsTechnica • 22 May

    AT&T has struck a deal to buy CenturyLink's consumer fiber broadband division for $5.75 billion, giving the Internet provider another 1.1 million fiber customers in 11 states.

    The all-cash deal is expected to close during the first half of 2026 assuming the companies obtain regulatory approval. AT&T will gain new customers in Arizona, Colorado, Florida, Idaho, Iowa, Minnesota, Nebraska, Nevada, Oregon, Utah, and Washington.

    The deal will give AT&T room to grow its user base by more than the 1.1 million existing CenturyLink customers, as AT&T said the network areas being sold include over 4 million fiber-enabled locations. "The transaction will enable AT&T to significantly expand access to AT&T Fiber in major metro areas like Denver, Las Vegas, Minneapolis-St. Paul, Orlando, Phoenix, Portland, Salt Lake City and Seattle, as well as additional geographies," AT&T said .

    Read full article

    Comments

    • chevron_right

      Did Google lie about building a deadly chatbot? Judge finds it plausible.

      news.movim.eu / ArsTechnica • 22 May

    Ever since a mourning mother, Megan Garcia, filed a lawsuit alleging that Character.AI's dangerous chatbots caused her son's suicide , Google has maintained that—so it could dodge claims that it had contributed to the platform's design and was unjustly enriched—it had nothing to do with C.AI's development.

    But Google lost its motion to dismiss the lawsuit on Wednesday after a US district judge, Anne Conway, found that Garcia had plausibly alleged that Google played a part in C.AI's design by providing a component part and "substantially" participating "in integrating its models" into C.AI. Garcia also plausibly alleged that Google aided and abetted C.AI in harming her son, 14-year-old Sewell Setzer III.

    Google similarly failed to toss claims of unjust enrichment, as Conway suggested that Garcia plausibly alleged that Google benefited from access to Setzer's user data. The only win for Google was a dropped claim that C.AI makers were guilty of intentional infliction of emotional distress, with Conway agreeing that Garcia didn't meet the requirements, as she wasn't "present to witness the outrageous conduct directed at her child."

    Read full article

    Comments

    • chevron_right

      “How you design the beep is important.” Behind the movement for calmer gadgets

      news.movim.eu / ArsTechnica • 22 May

    Do you miss the feel of tactile buttons on your kitchen appliances or lament car manufacturers' insistence on touchscreens? Have you ever found yourself clumsily fumbling with the door handles of a vehicle or distracted by the bright blue light beaming from your vacuum or Wi-Fi router?

    If so, you're not alone. The way technology gadgets are designed largely relies on things like blue, often LED, lights, flat resistive or capacitive touch input, and software. Some, like Amber Case, founder of the Calm Tech Institute , believe that these design choices distract from devices' purpose and functionality and are calling for a new approach to product design.

    "Calm Tech Institute is kind of a consumer advocacy body that's collecting stories and research from neuroscientists that says, look at how the mind wants texture, and look at how it wants physical buttons, and there's a part of your mind that needs [those]," Case told Ars Technica. "When we don't have it and we replace it with glass, we're not only losing something about human experience, but we're actually causing the mind stress.”

    Read full article

    Comments

    • wifi_tethering open_in_new

      This post is public

      arstechnica.com /gadgets/2025/05/what-makes-a-tech-gadget-calm-this-certification-firm-has-an-81-point-checklist/

    • Pictures 1 image

    • visibility
    • chevron_right

      How 3D printing is personalizing health care

      news.movim.eu / ArsTechnica • 20 May

    Three-dimensional printing is transforming medical care, letting the health care field shift from mass-produced solutions to customized treatments tailored to each patient’s needs. For instance, researchers are developing 3D-printed prosthetic hands specifically designed for children, made with lightweight materials and adaptable control systems.

    These continuing advancements in 3D-printed prosthetics demonstrate their increasing affordability and accessibility. Success stories like this one in personalized prosthetics highlight the benefits of 3D printing, in which a model of an object produced with computer-aided design software is transferred to a 3D printer and constructed layer by layer.

    We are a biomedical engineer and a chemist who work with 3D printing. We study how this rapidly evolving technology provides new options not just for prosthetics but for implants, surgical planning, drug manufacturing, and other health care needs. The ability of 3D printing to make precisely shaped objects in a wide range of materials has led to, for example, custom replacement joints and custom-dosage, multidrug pills.

    Read full article

    Comments

    • chevron_right

      Self-hosting is having a moment. Ethan Sholly knows why.

      news.movim.eu / ArsTechnica • 20 May

    Self-hosting is having a moment, even if it's hard to define exactly what it is.

    It's a niche that goes beyond regular computing devices and networks but falls short of a full-on home lab . (Most home labs involve self-hosting, but not all self-hosting makes for a home lab.) It adds privacy, provides DRM-free alternatives , and reduces advertising. It's often touted as a way to get more out of your network-attached storage (NAS), but it's much more than just backup and media streaming.

    Is self-hosting just running services on your network for which most people rely on cloud companies? Broadly, yes. But take a look at the selfh.st site/podcast/newsletter, the r/selfhosted subreddit , and all the GitHub project pages that link to one another, and you'll also find things that no cloud provider offers.

    Read full article

    Comments

    • chevron_right

      Gemini 2.5 is leaving preview just in time for Google’s new $250 AI subscription

      news.movim.eu / ArsTechnica • 20 May

    MOUNTAIN VIEW, Calif.—Google rolled out early versions of Gemini 2.5 earlier this year. Marking a significant improvement over the 2.0 branch. For the first time, Google's chatbot felt competitive with the likes of ChatGPT, but it's been "experimental" and later "preview" since then. At I/O 2025, Google announced general availability for Gemini 2.5, and these models will soon be integrated with Chrome. There's also a fancy new subscription plan to get the most from Google's AI. You probably won't like the pricing, though.

    Gemini 2.5 goes gold

    Even though Gemini 2.5 was revealed a few months ago, the older 2.0 Flash has been the default model all this time. Now that 2.5 is finally ready, the 2.5 Flash model will be swapped in as the new default. This model has built-in simulated reasoning, so its outputs are much more reliable than 2.0 Flash.

    Google says the release version of 2.5 Flash is better at reasoning, coding, and multimodality, but it uses 20–30 percent fewer tokens than the preview version. This edition is now live in Vertex AI, AI Studio, and the Gemini app. It will be made the default model in early June.

    Read full article

    Comments

    • chevron_right

      Trump’s trade war risks splintering the Internet, experts warn

      news.movim.eu / ArsTechnica • 20 May

    In sparking his global trade war, Donald Trump seems to have maintained a glaring blind spot when it comes to protecting one of America's greatest trade advantages: the export of digital services.

    Experts have warned that the consequences for Silicon Valley could be far-reaching.

    In a report released Tuesday, an intelligence firm that tracks global trade risks, Allianz Trade, shared results of a survey of 4,500 firms worldwide, designed "to capture the impact of the escalation of trade tensions." Amid other key findings, the group warned that the US's fixation on the country's trillion-dollar goods deficit risks rocking "the fastest-growing segment of global trade," America's "invisible exports" of financial and digital services.

    Read full article

    Comments

    • chevron_right

      Venus Aerospace flies its rotating detonation rocket engine for the first time

      news.movim.eu / ArsTechnica • 14 May

    A US-based propulsion company, Venus Aerospace, said Wednesday it had completed a short flight test of its rotating detonation rocket engine at Spaceport America in New Mexico.

    The company's chief executive and co-founder, Sassie Duggleby, characterized the flight as "historic." It is believed to be the first US-based flight test of an idea that has been discussed academically for decades, a rotating detonation rocket engine. The concept has previously been tested in a handful of other countries, but never with a high-thrust engine.

    "By proving this engine works beyond the lab, Venus brings the world closer to a future where hypersonic travel—traversing the globe in under two hours—becomes possible," Duggleby told Ars.

    Read full article

    Comments